This specialised tool is designed to remove and replace the Compression Needle from the shock body on WP PDS shocks.A must-have for those servicing WP PDS shocks, it is driven with a T-handle, holds the Needle, and is self-locating in the body.

The Whites 4in1 Fork Bleed Tool is a simple and economical workshop tool to simplify cartridge fork servicing. Built with four thread pitches from M10x1.0 to M12x1.25 allowing you to service almost any common street fork. The tool enables you to bleed the air...

SPECIFICATIONS:- Seal guide for Rear suspension seal head.- Does not damage the oil seal during installing the suspension seal.- Available for KYB/SHOWA and WP rear suspension.

The Whites Combo Fork Damper Tool is designed to hold the damper rod during assembly and disassembly of Honda XR400 or Suzuki DRZ400 forks. Constructed with a dual end, the spanner tyre prongs are used on the XR400/650 forks and the 27mm hex on...

The Whites Seal Bolt Removal Tool is designed to remove the SHOWA SFF air fork bottom sealing bolt.

Self -service display card with 12 individual fork seal cleaners. Easy way to keep your fork seals clean and debris free Extracts dirt and debris trapped between fork seal and tube Will work on conventional and upside down forks Use part number MP080395 for...

Designed for removing the fork cap on your forks, making fork oil changes a breeze. The Whites Fork Cap Wrenchs are long-lasting and are the essential tool when performing fork maintenance. Wrench for removing the front fork cap Closed-end for easy operation Size: 32mm Refer...

SPECIFICATIONS:- Front fork dust and oil seal insert guide.- Prevents damaged seals during intallation.- Made of smooth surface stainless steel for easy to install your dust and oil seals.

This is a 49 mm, 8-point box wrench for removing the fork cap (cartridge) on dual chamber closed cartridge forks on late-model Yamahas and Hondas. Features: 12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of...

The Whies Fork Cap Socket is used for removal and installation of the fork cap nut (1-3/8" hex) on most big twin and sportster models. Constructed with an o-ring insert design that allows you to remove/install the fork cap without the risk of damaging...

The fork tube tool is used for assembling and disassembling fork tubes from the fork bottoms, while the cartridge rod holding plate is perfect for disassembly and assembly of KYB/Showa Twin Chamber and most street cartridge forks. Designed to hold back the spring allowing...

SPECIFICATIONS:- Aluminum front fork top cap wrench.- Allows to disassemble and assemble in one cycle job with a wrench and rod stopper combined tool.- The closed design wrench grabs the top cap tightly.- Provides a hole to attach a torque wrench for maintaining accurate...

Used to remove aluminium fork cap on Showa BPF 43mm forks. Features: Fits 8 sided 45mm fork cap. Durable blue anodized finish. Replaces Honda OEM tool 07AMA-MGPA100. Replaces Kawasaki OEM tool 57001- 1741. Replaces Suzuki OEM tool 09941-53670-LPT.

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long-lasting and is the essential tool when performing fork maintenance. Wrench for removing the front fork cap Made of...

Designed to remove and install the clip on Harley-Davidson® collapsible push rod tubes on Twin Cam and earlier Models. Features: Flat portion of tool fits under the cylinder head while cupped end fits over the bell in the tube and then compresses the spring...

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip...

The Whites Damping Rod Bleed Tool allows the damping rod to be retrieved effortlessly after sping installation. Compatible with Kayaba, Showa and WP inverted forks and constructed with a covered bleed port to prevent oil splatter. Including a zinc plated rod with knurled handle...

SPECIFICATIONS:- Special tool for removing compression valves from KYB and SHOWA Twin chamber type inner cartridge.- SHOWA SFF Air removal tool does not contact air bleed valve.- Available for KTM White Power suspension removal tool.- Can be used for the special shape of WP...

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip...

SPECIFICATIONS:- Front fork dust and oil seal insert guide.- Prevents damaged seals during intallation.- Made of smooth surface stainless steel for easy to install your dust and oil seals.