Spark plugs are well retained and easily removed via the unique retention system designed into the Pro Plug Socket™. When installing and removing spark plugs, the Pro Plug Socket™ can be driven in multiple ways: easily slip a 17 mm wrench over the top...

Innovative design will Press, Break and Rivet 520, 525, and 530 chains with one convenient tool. Features: Versatile design will remove chain pins, press master-link plates, and rivet hollow nose and soft nose (quad stake) master link pins on O-ring and non-O-ring type chains....

This specialised tool is designed to remove and replace the Compression Needle from the shock body on WP PDS shocks.A must-have for those servicing WP PDS shocks, it is driven with a T-handle, holds the Needle, and is self-locating in the body.

The Whites 4in1 Fork Bleed Tool is a simple and economical workshop tool to simplify cartridge fork servicing. Built with four thread pitches from M10x1.0 to M12x1.25 allowing you to service almost any common street fork. The tool enables you to bleed the air...

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and...

Having difficulty accessing your tyre valves? Well, that problem’s solved with these 90-degree brass valve stem extensions. Simply remove your valve cap and screw this extension onto your valve stem. Now you have easy access for connecting your MotoPressor Tyre Pump or Tyre Gauge....

SPECIFICATIONS:- Designed for all types of tyre changing needs.- The bend of the lever and wide spoon area is designed for quick and easy tyre removal.- The durable rubber grip provides better grip.- Length: 230mm.

Remove brake caliper pistons easily with Whites Brake Caliper Piston Removal Pliers. The Whites Brake Caliper Piston Removal Pliers are a must-have tool for brake caliper maintenance. When replacing the seals and o-rings of your caliper, it is important to remove the piston without...

SPECIFICATIONS:- Seal guide for Rear suspension seal head.- Does not damage the oil seal during installing the suspension seal.- Available for KYB/SHOWA and WP rear suspension.

The Whites Combo Fork Damper Tool is designed to hold the damper rod during assembly and disassembly of Honda XR400 or Suzuki DRZ400 forks. Constructed with a dual end, the spanner tyre prongs are used on the XR400/650 forks and the 27mm hex on...

The Whites Tappet Block Tool is designed to drift the tappet block in and out easily without causing damage to the engine. Compatible with most unit and pre-unit 350, 500, 600 and 750 Triumph Twins from 1939-1988, a must-have tool for the Triumph enthusiast....

The Whites KTM Adventure Axle Removal Tool is a simple but handy tool that assists you in removing the front wheel axle easier while preventing damage to the axle or wheel. Compatible with all KTM 950/990 Adventure bikes and constructed from aluminium for a...

A range of quality tools for bleeding & lubrication maintenance. Makes bleeding your brakes a one-person job Instructions included Made in the U.S.A. Will not bleed air from a dry system

Fits internal hex on many late-model sportbike axles and some dirt bikes. Four metric hex sizes: 17, 19, 22 and 24mm 3/8" square drive on both ends (rated for maximum 90 ft lbs torque) Made from billet 7075 T-6 aluminium - weights only 2.5...

The Whites Jet Wrench is a two piece tool set with 3 different applications, a double-sided 6mm and 8mm wrench for round jets is included along with a 6mm wrench for hex jets. The double-sided wrench is constructed with a knurled centre for additional...

The Whites Seal Bolt Removal Tool is designed to remove the SHOWA SFF air fork bottom sealing bolt.

The Whites Piston Ring Tool is designed to prevent piston ring damage during cylinder installation, the tool can be easily removed after the cylinder is in position. Including four bands ranging from 40-85mm the kit fits most bore sizes and supplied in a convenient...

Oxford’s huge range of products encompasses everything that makes life on bikes better: from jackets, pants and boots to accessories, hard parts, locks, luggage and much more! Their market-leading products are designed in-house by a team of active enthusiasts and skilled technicians, based at...

Unique combination wrench design has 3-sided open end and semi- closed end. Features: Use open end for quick adjustment of spoke nipples and a semi- closed end for those hard to turn nipples that require more torque. Specially designed ergonomic handle allows larger turning...

SPECIFICATIONS:- Spring removal tool for twin shock motorbikes.- 2 spring hooks hold the springs secure while compressing the springs, making it easy to remove the springs from the shock bodies.