{"title":"MOTOBATT BATTERIES","description":"","products":[{"product_id":"mbt6n4","title":"Motobatt Battery Quadflex AGM - MBT6N4","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, and two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can breakdown the plate and cause short circuits between the plates or break plate welds which result in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 6V\u003c\/li\u003e \u003cli\u003eCapacity (10-hour rate): 4Ah\u003c\/li\u003e \u003cli\u003eCapacity (20-hour rate): 4.2Ah\u003c\/li\u003e \u003cli\u003eWeight: 0.73kg (1.61lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 71 x 71 x 96mm (2.8 x 2.8 x 3.8)\u003c\/li\u003e \u003cli\u003eTerminal Cable Adaptors: MP6NC3, MP6NC4, MP6NC7, MP6NC8, MP6NC9, MP6NC10, MP6NC11, MP6NCD\u003c\/li\u003e \u003cli\u003eTerminals: 2, Wires\u003c\/li\u003e \u003cli\u003eScrews: NA (Not Applicable)\u003c\/li\u003e \u003cli\u003eAllen Wrench: NA (Not Applicable)\u003c\/li\u003e \u003cli\u003eTerminal Caps: NA (Not Applicable)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA)\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid.\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946824323316,"sku":"MBT6N4","price":51.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBT6N4.jpg?v=1780174486"},{"product_id":"mbzcpd4x2a","title":"Motobatt Charger Quad Bank 12v 2.0A suits Conventional, AGM \u0026 GEL Batteries","description":"\u003cp\u003eFour intelligent individual 9-step fully automatic chargers in one neat wall-mounted unit. A killer combination for a workshop or man cave.\u003c\/p\u003e \u003cp\u003eNo more untidy, dangerous charging areas—Motobatt Multi Station chargers make charging a breeze. Just plug and leave.\u003c\/p\u003e \u003cp\u003eNo sparks, fumes, or dangerous conditions left unattended.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eCapacity: 2 Amp\u003c\/li\u003e \u003cli\u003eCharging Algorithm: 9-step automatic charging and maintaining\u003c\/li\u003e \u003cli\u003eInput: Auto-switching 120-240VAC, 50\/60Hz\u003c\/li\u003e \u003cli\u003eMax Voltage: 14.9V (Pb), temperature compensated\u003c\/li\u003e \u003cli\u003eInput Cable: 6ft, 18AWG (US SPT-2, EU-H03VV)\u003c\/li\u003e \u003cli\u003eCompatible Batteries: 12V standard flooded, AGM, GEL\u003c\/li\u003e \u003cli\u003eSpecial Features: \u003cul\u003e \u003cli\u003eOvercharge protection\u003c\/li\u003e \u003cli\u003eReverse polarity protection\u003c\/li\u003e \u003cli\u003eShort circuit protection\u003c\/li\u003e \u003cli\u003eSpark-proof battery recovery mode\u003c\/li\u003e \u003cli\u003e72-hour safety timer\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eAccessories Included: \u003cul\u003e \u003cli\u003e4x MB-CCRT 21\" ring terminal leads (6mm diameter, 7.5A fuse, 2DIN connector plug)\u003c\/li\u003e \u003cli\u003eMB-MAP 21\"\u003c\/li\u003e \u003cli\u003e4x MB-CCAC 21\" alligator clip leads\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eWall Mountable: Yes\u003c\/li\u003e \u003cli\u003eRecommended Battery Range: 4-100Ah lead-acid batteries (charging \u0026amp; maintenance)\u003c\/li\u003e \u003cli\u003eDimensions: 9\" (L) x 4\" (W) x 9\" (H)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946837594356,"sku":"MBZCPD4X2A","price":549.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCPD4X2A.jpg?v=1780151760"},{"product_id":"mblx16uhdhp","title":"Motobatt Pro Lithium Battery MLX16UHD-HP *4","description":"\u003cp\u003eMotobatt Pro Lithium batteries are around 3x lighter than conventional lead-acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCapacity: 10 Ah\u003c\/li\u003e \u003cli\u003eCA: 600\u003c\/li\u003e \u003cli\u003eBox quantity: 4\u003c\/li\u003e \u003cli\u003eSize: (LxWxH) 151 x 87 x 145, 151 x 87 x 161 (EVA 5)\u003c\/li\u003e \u003cli\u003eQuadflex: MBYZ16U\/HD, MBTX20U\/HD\u003c\/li\u003e \u003cli\u003eReplaces: \u003cul\u003e \u003cli\u003eGYZ16HL, GYZ16H, YTX14, YTX14BS, YTX14H, YTX14HBS, YTX14L, YTX14LBS, KMX14BS\u003c\/li\u003e \u003cli\u003eYTX16, YTX16BS, YTX16H-BS, YTX16BS1 YTX20A-BS, YTX20CH, YTX20CHBS\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOver-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.\u003c\/li\u003e \u003cli\u003eOver-discharge protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.\u003c\/li\u003e \u003cli\u003eCell balancing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCell Balancing Circuit (CBC)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.\u003c\/p\u003e \u003cp\u003eEach Motobatt Lithium battery contains a unique CBC which always controls the charge\/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.\u003c\/p\u003e \u003cp\u003eDue to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Aggressive and repeat discharging may affect capacity and rechargeability\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProtection Circuit Board (PCB)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eExclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMotobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.\u003c\/li\u003e \u003cli\u003eMotobatt Pro Lithium batteries are high-performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.\u003c\/li\u003e \u003cli\u003eMotobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946842018036,"sku":"MBLX16UHDHP","price":429.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBLX16UHDHP.jpg?v=1780030531"},{"product_id":"mb7u","title":"Motobatt Battery Quadflex AGM - MB7U","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 7\u003c\/li\u003e \u003cli\u003eC(20) Ah: 7.4\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 100A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 158A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 324A\u003c\/li\u003e \u003cli\u003eWeight: 2.4kg (5.29lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 151 x 65 x 94mm (5.94 x 2.56 x 3.7)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M5x2.5 (MPT1)\u003c\/li\u003e \u003cli\u003eScrews: 4, M5x7 (2x MPS1)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 3x3 (MPAK1)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 2, 11x5.5 (MPC1)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946867773684,"sku":"MB7U","price":93.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MB7U.jpg?v=1780205906"},{"product_id":"mbzcusbset","title":"Motobatt USB Cable Set (MB-USB + MB-CCRT)","description":"\u003cp\u003eConnect a USB device to your Motobatt Battery with this cable, charge your phone, gps etc while you ride.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eGet power from 12V motorcycle battery.\u003c\/li\u003e \u003cli\u003eUSB output 5V 2.1A max.\u003c\/li\u003e \u003cli\u003eIdeal for charging the smarth phone, Tablet PC and GPS from your motorcycle battery.\u003c\/li\u003e \u003cli\u003eUser friendly connect the battery via SAE coannector.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946873180404,"sku":"MBZCUSBSET","price":49.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCUSBSET.jpg?v=1780189261"},{"product_id":"mbzljs7500b","title":"Motobatt Lithium Jump Starter 7500 \u0026 Phone Charger","description":"\u003cp\u003eDon't leave home without this powerful and high-quality lithium Jump pack from Motobatt. Featuring quality plug connections to high- voltage clamp leads, ultra-reliable and sound connections.\u003c\/p\u003e \u003cp\u003e800A peak current will have your Vehicle or Motorcycle starting in seconds. This little beauty is a must-have for the trail or the road. It can be charged from a standard USB power outlet.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eJump Start - 12V Vehicles (motorcycle or car).\u003c\/li\u003e \u003cli\u003e5V\/2.1A USB Output - Charges smartphones, tablets and more.\u003c\/li\u003e \u003cli\u003eLED Flashlight - 3 modes:\u003c\/li\u003e \u003cul\u003e \u003cli\u003eIllumination\u003c\/li\u003e \u003cli\u003eStrobe\u003c\/li\u003e \u003cli\u003eSOS\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eBuilt-in protection - For overcharging and over-discharging.\u003c\/li\u003e \u003cli\u003eCharge indicator - Quickly view charge levels.\u003c\/li\u003e \u003cli\u003eAutomatic power On\/Off - When not in use.\u003c\/li\u003e \u003cli\u003eCopper jumper clamps.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eStart Current: 400A.\u003c\/li\u003e \u003cli\u003ePeak Current: 800A.\u003c\/li\u003e \u003cli\u003eBattery Capacity: 7500mAh.\u003c\/li\u003e \u003cli\u003eDimensions: 154 x 80 x 27mm.\u003c\/li\u003e \u003cli\u003eWeight: 300g.\u003c\/li\u003e \u003cli\u003eInput: 5V\/1.5A\u003c\/li\u003e \u003cli\u003eOutput: 5V\/2.1A (device), 12V (vehicle jump start).\u003c\/li\u003e \u003cli\u003eOperation temperature: -20c to 60c\u003c\/li\u003e \u003cli\u003eFull charging time: 6 hours\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x Jump Starter – Jump Starter \/ Personal Power Supply Unit\u003c\/li\u003e \u003cli\u003e1x 3-into-1 USB Cable – Type-C, Micro USB, Lightning\u003c\/li\u003e \u003cli\u003e1x Mini Jumper Clamps – Plugs into Micro-start for Jump Starting\u003c\/li\u003e \u003cli\u003e1x USB-A to USB-C Charging Cable\u003c\/li\u003e \u003cli\u003e1x Hard Case\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAbout Motobatt\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFounded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946898182388,"sku":"MBZLJS7500B","price":179.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZLJS7500B.jpg?v=1780104192"},{"product_id":"mbt4bb","title":"Motobatt Battery Quadflex AGM - MBT4BB","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 2.5\u003c\/li\u003e \u003cli\u003eC(20) Ah: 4\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 40A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 94A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 254A\u003c\/li\u003e \u003cli\u003eWeight: 1.05kg (2.31lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 113 x 38 x 87mm (4.45 x 1.5 x 3.43)\u003c\/li\u003e \u003cli\u003eTerminals: 2, Spade\u003c\/li\u003e \u003cli\u003eScrews: NA\u003c\/li\u003e \u003cli\u003eAllen Wrench: NA\u003c\/li\u003e \u003cli\u003eTerminal Caps: NA\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946913419508,"sku":"MBT4BB","price":103.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBT4BB.jpg?v=1780044315"},{"product_id":"mblx30uhdhp","title":"Motobatt Pro Lithium Battery MLX30UHD-HP *4","description":"\u003cp\u003eMotobatt Pro Lithium batteries are around 3x lighter than conventional lead-acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCapacity: 18 Ah\u003c\/li\u003e \u003cli\u003eCA: 800\u003c\/li\u003e \u003cli\u003eBox quantity: 4\u003c\/li\u003e \u003cli\u003eSize: (LxWxH) 166 x 126 x 175, 166 x 126 x 192 (EVA 9)\u003c\/li\u003e \u003cli\u003eQuadflex: MBTX30U\/HD\u003c\/li\u003e \u003cli\u003eReplaces: \u003cul\u003e \u003cli\u003eY60N24A, Y60N24ALB, Y60N24LA, Y60N24LA2, 12N24-3, 12N24-3A, 12N24 -4, 12N24-4A, YIX30, YIX30L, YIX30L-BS, YB30LB, Y60N30LA, Y60N30LB, GYZ32HL, 52515, 53030\u003c\/li\u003e \u003cli\u003eYIX30L-PW, YIX30L-BS-PW, YB30CLB\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOver-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.\u003c\/li\u003e \u003cli\u003eOver-discharge protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.\u003c\/li\u003e \u003cli\u003eCell balancing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCell Balancing Circuit (CBC)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.\u003c\/p\u003e \u003cp\u003eEach Motobatt Lithium battery contains a unique CBC which always controls the charge\/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.\u003c\/p\u003e \u003cp\u003eDue to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Aggressive and repeat discharging may affect capacity and rechargeability\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProtection Circuit Board (PCB)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eExclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMotobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.\u003c\/li\u003e \u003cli\u003eMotobatt Pro Lithium batteries are high-performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.\u003c\/li\u003e \u003cli\u003eMotobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946937503988,"sku":"MBLX30UHDHP","price":619.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBLX30UHDHP.jpg?v=1780165261"},{"product_id":"mbl51814hp","title":"Motobatt Pro Lithium Battery ML51814-HP *4","description":"\u003cp\u003eMotobatt Pro Lithium batteries are around 3x lighter than conventional lead-acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCapacity: 10 Ah\u003c\/li\u003e \u003cli\u003eCA: 600\u003c\/li\u003e \u003cli\u003eBox quantity: 4\u003c\/li\u003e \u003cli\u003eSize: (LxWxH) 183 x 80 x 170\u003c\/li\u003e \u003cli\u003eQuadflex: MB51814\u003c\/li\u003e \u003cli\u003eReplaces: 51814, 51913, YT19BL-BS\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOver-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.\u003c\/li\u003e \u003cli\u003eOver-discharge protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.\u003c\/li\u003e \u003cli\u003eCell balancing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCell Balancing Circuit (CBC)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.\u003c\/p\u003e \u003cp\u003eEach Motobatt Lithium battery contains a unique CBC which always controls the charge\/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.\u003c\/p\u003e \u003cp\u003eDue to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Aggressive and repeat discharging may affect capacity and rechargeability\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProtection Circuit Board (PCB)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eExclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMotobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.\u003c\/li\u003e \u003cli\u003eMotobatt Pro Lithium batteries are high-performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.\u003c\/li\u003e \u003cli\u003eMotobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946937471220,"sku":"MBL51814HP","price":429.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBL51814HP.jpg?v=1780125002"},{"product_id":"mbltz14shp","title":"Motobatt Pro Lithium Battery MLTZ14S-HP *4","description":"\u003cp\u003eMotobatt Pro Lithium batteries are around 3x lighter than conventional lead-acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCapacity: 8 Ah\u003c\/li\u003e \u003cli\u003eCA: 560\u003c\/li\u003e \u003cli\u003eBox quantity: 4\u003c\/li\u003e \u003cli\u003eSize: (LxWxH) 151 x 87 x 110, 151 x 87 x 130 (EVA 4)\u003c\/li\u003e \u003cli\u003eQuadflex: MBTZ14S, MBTX12U\u003c\/li\u003e \u003cli\u003eReplaces: \u003cul\u003e \u003cli\u003eYTZ12S, YTZ14S\u003c\/li\u003e \u003cli\u003eYB12BB2, YTX12BS, YTX12, YTX15, YTX15L, YTX15L-BS\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOver-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.\u003c\/li\u003e \u003cli\u003eOver-discharge protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.\u003c\/li\u003e \u003cli\u003eCell balancing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCell Balancing Circuit (CBC)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.\u003c\/p\u003e \u003cp\u003eEach Motobatt Lithium battery contains a unique CBC which always controls the charge\/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.\u003c\/p\u003e \u003cp\u003eDue to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Aggressive and repeat discharging may affect capacity and rechargeability\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProtection Circuit Board (PCB)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eExclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMotobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.\u003c\/li\u003e \u003cli\u003eMotobatt Pro Lithium batteries are high-performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.\u003c\/li\u003e \u003cli\u003eMotobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946942189812,"sku":"MBLTZ14SHP","price":369.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBLTZ14SHP.jpg?v=1780126500"},{"product_id":"mbzljs10000","title":"Motobatt Lithium Jump Starter 10000 \u0026 Air Compressor","description":"\u003cp\u003eDon't leave home without this powerful and high-quality lithium Jump pack from Motobatt. Featuring quality plug connections to high- voltage clamp leads, ultra-reliable and sound connections.\u003c\/p\u003e \u003cp\u003e1000A peak current will have your Vehicle or Motorcycle starting in seconds. This little beauty is a must-have for the trail or the road. It can be charged from a standard USB power outlet.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eJump Start - 12V Vehicles (motorcycle or car).\u003c\/li\u003e \u003cli\u003e5V\/2.4A USB Output - Charges smartphones, tablets and more.\u003c\/li\u003e \u003cli\u003eLED Flashlight - 3 modes:\u003c\/li\u003e \u003cul\u003e \u003cli\u003eIllumination\u003c\/li\u003e \u003cli\u003eStrobe\u003c\/li\u003e \u003cli\u003eSOS\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eBuilt-in protection - For overcharging and over-discharging.\u003c\/li\u003e \u003cli\u003eCharge indicator - Quickly view charge levels.\u003c\/li\u003e \u003cli\u003eAutomatic power On\/Off - When not in use.\u003c\/li\u003e \u003cli\u003eCopper jumper clamps.\u003c\/li\u003e \u003cli\u003ePump up your Tires - Built-in Air Compressor\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eStart Current: 500A.\u003c\/li\u003e \u003cli\u003ePeak Current: 1000A.\u003c\/li\u003e \u003cli\u003eBattery Capacity: 10000mAh.\u003c\/li\u003e \u003cli\u003eDimensions: 245 x 100 x 46mm.\u003c\/li\u003e \u003cli\u003eWeight: 880g.\u003c\/li\u003e \u003cli\u003eInput: 5V\/2A\u003c\/li\u003e \u003cli\u003eOutput: 5V\/2.4A x2 (device), 12V (vehicle jump start).\u003c\/li\u003e \u003cli\u003eOperation temperature: -20c to 60c\u003c\/li\u003e \u003cli\u003eFull charging time: 6 hours\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x Jump Starter – Jump Starter \/ Personal Power Supply Unit\u003c\/li\u003e \u003cli\u003e1x Built-in Air Compressor – With detachable Air Line\u003c\/li\u003e \u003cli\u003e1x 3-into-1 USB Cable – Type-C, Micro USB, Lightning\u003c\/li\u003e \u003cli\u003e1x Mini Jumper Clamps – Plugs into Micro-start for Jump Starting\u003c\/li\u003e \u003cli\u003e1x USB-A to USB-C Charging Cable\u003c\/li\u003e \u003cli\u003e1x Hard Case\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAbout Motobatt\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFounded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946946449652,"sku":"MBZLJS10000","price":269.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZLJS10000.jpg?v=1780166728"},{"product_id":"mbzcpdcwb","title":"Motobatt Charger Water Boy 12v 1.0A suits AGM \u0026 GEL Batteries","description":"\u003cp\u003eThis Motobatt charger features a completely waterproof charging system and performs a 9-stage charging and maintenance algorithm. It is ideal for outdoor use in vehicles such as motorcycles, watercraft, snowmobiles, boats, ATVs, lawnmowers, and small car batteries.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWaterproof, perfect for outdoor use.\u003c\/li\u003e \u003cli\u003e9-step algorithm automatic charging and maintaining.\u003c\/li\u003e \u003cli\u003eOvercharge protection.\u003c\/li\u003e \u003cli\u003eReverse polarity protection.\u003c\/li\u003e \u003cli\u003eOverload\/short circuit protection.\u003c\/li\u003e \u003cli\u003eSpark-proof.\u003c\/li\u003e \u003cli\u003eMaintains full charge.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eApplication: 12V batteries, suits all AGM, Lead Acid, Calcium, and Gel batteries\u003c\/li\u003e \u003cli\u003eInput: Auto-switching 120-240VAC, 50\/60Hz\u003c\/li\u003e \u003cli\u003eInput Cable: 6′ \/ 18AWG (U.S. SPT-2, EU - H03VV, Aust\/NZ - H03VV)\u003c\/li\u003e \u003cli\u003eOutput: 12VDC 1.0A\u003c\/li\u003e \u003cli\u003eMax Charge Current: 1.0A\u003c\/li\u003e \u003cli\u003eMax Voltage: 14.8V\u003c\/li\u003e \u003cli\u003eBattery Capacity: Charging – 2 to 33Ah, Maintenance – up to 80Ah\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946952904948,"sku":"MBZCPDCWB","price":139.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCPDCWB.jpg?v=1780045910"},{"product_id":"mbtx20u","title":"Motobatt Battery Quadflex AGM - MBTX20U","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 21\u003c\/li\u003e \u003cli\u003eC(20) Ah: 22.3\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 320A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 407A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 624A\u003c\/li\u003e \u003cli\u003eWeight: 6.5kg (14.33lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 175 x 87 x 155mm (6.89 x 3.43 x 6.1)\u003c\/li\u003e \u003cli\u003eTerminal Height 1: 100mm (3.94)\u003c\/li\u003e \u003cli\u003eTerminal Height 2: 175mm (6.89)\u003c\/li\u003e \u003cli\u003eTerminals: 4, M6x2.5 (MPT2 \u0026amp; MPT3)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 4, 12x5.5 (2x MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: 20mm Bottom (MPBS7), 13mm Back (MPSS)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946977251572,"sku":"MBTX20U","price":258.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBTX20U.jpg?v=1780137659"},{"product_id":"mblx7uhp23","title":"Motobatt Pro Lithium Battery MLX7U-HP *8","description":"\u003cp\u003eMotobatt Pro Lithium batteries are around 3x lighter than conventional lead-acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCapacity: 5 Ah\u003c\/li\u003e \u003cli\u003eCA: 350\u003c\/li\u003e \u003cli\u003eBox quantity: 8\u003c\/li\u003e \u003cli\u003eSize: (LxWxH) 114 x 70x 107, 114 x 70x 127\u003c\/li\u003e \u003cli\u003eQuadflex: MBTZ7S, MBTX7U\u003c\/li\u003e \u003cli\u003eReplaces: \u003cul\u003e \u003cli\u003eYTX5L-BS, YTZ6S, YTZ7S\u003c\/li\u003e \u003cli\u003eYTX7L-BS, YTZ8V\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOver-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.\u003c\/li\u003e \u003cli\u003eOver- discharge protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.\u003c\/li\u003e \u003cli\u003eCell balancing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCell Balancing Circuit (CBC)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.\u003c\/p\u003e \u003cp\u003eEach Motobatt Lithium battery contains a unique CBC which always controls the charge\/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.\u003c\/p\u003e \u003cp\u003eDue to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Aggressive and repeat discharging may affect capacity and rechargeability\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProtection Circuit Board (PCB)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eExclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMotobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.\u003c\/li\u003e \u003cli\u003eMotobatt Pro Lithium batteries are high- performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.\u003c\/li\u003e \u003cli\u003eMotobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46946982789364,"sku":"MBLX7UHP23","price":249.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBLX7UHP23.jpg?v=1780128456"},{"product_id":"mb10u","title":"Motobatt Battery Quadflex AGM - MB10U","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 14.5\u003c\/li\u003e \u003cli\u003eC(20) Ah: 15.4\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 175A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 238A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 420A\u003c\/li\u003e \u003cli\u003eWeight: 4.3kg (9.48lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 135 x 90 x 146mm (5.31 x 3.54 x 5.75)\u003c\/li\u003e \u003cli\u003eTerminal Height: 155mm (6.1)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 4, 12x5.5 (2x MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: 9mm Bottom (MPBS3)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947083583732,"sku":"MB10U","price":174.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MB10U.jpg?v=1780135445"},{"product_id":"mbcterm2","title":"Motobatt C Terminal 2 M6","description":"\u003cp\u003eM6 stainless steel screws for Motobatt batteries. Can fit from top, front or side position. Stacking accessory ring cable harnesses on a single terminal is a thing of the past!\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUp to 8 fitting points per battery.\u003c\/li\u003e \u003cli\u003eUsed for adding additional mounting points for accessory leads.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947154559220,"sku":"MBCTERM2","price":5.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBCTERM2.jpg?v=1780112140"},{"product_id":"mbt9b4","title":"Motobatt Battery Quadflex AGM - MBT9B4","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 9\u003c\/li\u003e \u003cli\u003eC(20) Ah: 9.5\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 140A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 201A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 370A\u003c\/li\u003e \u003cli\u003eWeight: 2.82kg (6.22lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 150 x 70 x 105mm (5.91 x 2.76 x 4.13)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 2, 12x5.5 (MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947154821364,"sku":"MBT9B4","price":140.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBT9B4.jpg?v=1780182475"},{"product_id":"mbl7uhp","title":"Motobatt Pro Lithium Battery ML7U-HP *8","description":"\u003cp\u003eMotobatt Pro Lithium HP Series battery offers complete overcharging, over-discharging, temperature protection and cell balancing capability, to provide maximum performance, protection and safety to the battery.\u003c\/p\u003e \u003cp\u003eMotobatt Pro Lithium P Series battery only offers Overcharging, Temperature Protection and Cell Balancing capabilities.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOvercharging Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.\u003c\/li\u003e \u003cli\u003eOver-discharging protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.\u003c\/li\u003e \u003cli\u003eCell Balancing is vital to optimizing the battery's health. This function allows the voltage to be balanced in each cell, maximizing power, performance, and enhancing the battery's life span.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eMotobatt Pro Lithium\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSafe – Stable lithium cell and protection (PCB)\u003c\/li\u003e \u003cli\u003ePowerful – Maximum cell power and best battery design\u003c\/li\u003e \u003cli\u003eDurable – Cell balancing circuit (CBC)\u003c\/li\u003e \u003cli\u003eFitment – Light and original equipment fit\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAh: 4\u003c\/li\u003e \u003cli\u003eCA: 320\u003c\/li\u003e \u003cli\u003eBox Quantity: 8\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpacer Sizes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e151 x 65 x 95 \u003cul\u003e \u003cli\u003eMB7U\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003eMotobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve the best battery performance and longest life span.\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947184247028,"sku":"MBL7UHP","price":209.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBL7UHP.jpg?v=1780193040"},{"product_id":"mbt14b4","title":"Motobatt Battery Quadflex AGM - MBT14B-4","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 14\u003c\/li\u003e \u003cli\u003eC(20) Ah: 14.8\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 180A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 243A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 435A\u003c\/li\u003e \u003cli\u003eWeight: 4.1kg (9.04lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 150 x 70 x 145mm (5.91 x 2.76 x 5.71)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 2, 12x5.5 (MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947223470324,"sku":"MBT14B4","price":252.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBT14B4.jpg?v=1780047784"},{"product_id":"mbt12b4","title":"Motobatt Battery Quadflex AGM - MBT12B-4","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 12\u003c\/li\u003e \u003cli\u003eC(20) Ah: 12.7\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 165A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 228A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 415A\u003c\/li\u003e \u003cli\u003eWeight: 3.52kg (7.76lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 150 x 70 x 130mm (5.91 x 2.76 x 5.12)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 2, 12x5.5 (MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947232514292,"sku":"MBT12B4","price":166.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBT12B4.jpg?v=1780084880"},{"product_id":"mbztmbmini","title":"Motobatt Battery\/System Tester 12V 20-450CCA","description":"\u003cp\u003eFounded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eNo internal battery\u003c\/li\u003e \u003cli\u003eMicro designed for pocket storage\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eApplicat 12V Battery \u0026amp; 12V Charging Systems\u003c\/li\u003e \u003cli\u003eOperating Range: 20-450 CCA\u003c\/li\u003e \u003cli\u003eVoltmeter: 7 to 15V\u003c\/li\u003e \u003cli\u003eTest Type: Micro Load Dynamic Resistance\u003c\/li\u003e \u003cli\u003eDisplay: 4 Character LED \u0026amp; 4 LED indicators\u003c\/li\u003e \u003cli\u003eLead Set: 64cm (25\") motorcycle battery clamps\u003c\/li\u003e \u003cli\u003eDimensions: 124 x 79 x 21mm (4.9\" x 3.1\" x 0.84\")\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eMotobatt chargers utilise Motobatt’s unique 9 Stage Charging and Maintenance Process.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Qualification Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eInitially ensures that the battery is in good condition prior to launching charge processing. As a safety measure charge process will not begin if the battery is below 2V.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Battery Rescue Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt Battery Rescue starts if the battery voltage has risen unusually high in the early portion of the re-charge cycle. This is usually caused by plate sulfation. Once the battery rescue phase has succeeded in getting the battery to accept power, normal battery charging will begin.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Soft Start Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSoft Start is used when the charger has detected a battery at a very low initial state of charge. Voltage and current are delivered at specified rates to help the battery to recover prior to entering Pulse charge mode.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Pulse Mode Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt Pulse mode provides a high-frequency pulse charge to help the newly recovered battery to continue to accept charge as it enters the reconditioning phase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Recondition Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Motobatt reconditioning phase continues to work the battery at a slightly higher voltage and amperage to “re-activate” the battery plates for improved depth of charge and charge acceptance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Bulk Charge Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWith the battery now through Pulse and reconditioning phases and well on its way to full recovery the Motobatt bulk charge phase gives the battery constant current taking the battery up to 80% of its capacity.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Absorption Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIn the Motobatt absorption phase, the battery is given constant voltage while the current is reduced based on action taken from monitoring the batteries current state until the battery is 100% charged.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Check Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe battery will now be checked to be sure that it is holding a charge properly and the charger will make a determination and classify the battery for use, or not.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Maintenance Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe battery can be safely left on the charger indefinitely. The unit will monitor the battery and “turn-on” again as needed to maintain the battery at a full state of readiness.\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947354542324,"sku":"MBZTMBMINI","price":159.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZTMBMINI.jpg?v=1780055353"},{"product_id":"mbztbctp","title":"Motobatt Battery Capacity Tester Printer","description":"\u003cp\u003ePrinter for Motobatt Battery Capacity Tester (SKU: MBZTBCT).\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947377316084,"sku":"MBZTBCTP","price":109.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZTBCTP.jpg?v=1780188736"},{"product_id":"mbzmpaadaptor","title":"Motobatt Charger\/Tester Extension Posts","description":"\u003cbr\u003e\t\u003cbr\u003e\u003cbr\u003e\tMotobatt \"Smart\" Chargers\u003cbr\u003e\u003cbr\u003e\t\u003cbr\u003e\u003cbr\u003e\tMotobatt Chargers are suitable for all battery types including AGM , Gel and traditional Acid Batteries.\u003cbr\u003e\u003cbr\u003e\tRange of different chargers \u0026amp; charges and maintainers at different price points, and all have a 5 year\u003cbr\u003e\u003cbr\u003e\twarranty! ! \u003cbr\u003e\u003cbr\u003e\tFor more information on the Charger range, please see the Motobatt Catalogue pages 20 to 30below and the Motobatt 72 Hour resource.\u003cbr\u003e\u003cbr\u003e\t\u003cbr\u003e\u003cbr\u003e\t\u003cbr\u003e\t\u003cbr\u003e\t\tOpen publication - Free publishing - More agm \t","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947382198516,"sku":"MBZMPAADAPTOR","price":12.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZMPAADAPTOR.jpg?v=1780049032"},{"product_id":"mb55u","title":"Motobatt Battery Quadflex AGM - MB5.5U","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eSpecifications:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eVoltage: 12V\u003cbr\u003eCCA: 90\u003cbr\u003eCapacity: 7Ah\u003cbr\u003eWeight: 2.48kg (5.47lbs)\u003cbr\u003eDimensions (LxWxH): 135 x 60 x 130mm (5.31 x 2.36 x 5.12)\u003cbr\u003eTerminals: 2, M5x2.5 (MPT1)\u003cbr\u003eScrews: 4, M5x7 (2x MPS1)\u003cbr\u003eAllen Wrench: 1, 3x3 (MPAK1)\u003cbr\u003eTerminal Caps: 4, 11x5.5 (2x MPC1)\u003cbr\u003eSpacer: None\u003c\/p\u003e\u003cp\u003eFounded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.\u003c\/p\u003e\r\n\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eQuadflex:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e\r\n\u003cp\u003eEach plate in the battery is wrapped in a fiberous glass matting which not only absorbs all liquid electrolyte but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can breakdown the plate and cause short circuits between the plates or break plate welds which result in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e\r\n\u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e\r\n\u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre-conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePatented QuadFlex multi-fit terminals\u003c\/li\u003e\r\n\u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle\u003c\/li\u003e\r\n\u003cli\u003eFully sealed – Can be mounted and transported in any position\u003c\/li\u003e\r\n\u003cli\u003eNo initial charging – Install and go, charged right out of the box\u003c\/li\u003e\r\n\u003cli\u003eMaintenance Free – No messy acid to worry about\u003c\/li\u003e\r\n\u003cli\u003e20% more cold cranking amps (CCA)\u003c\/li\u003e\r\n\u003cli\u003eEasy accessory connection with multiple terminals\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eMOTOBATT BATTERIES ARE AVAILABLE VIA COURIER DELIVERY AS THEY CONTAIN NO LIQUID ACID!\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947422699764,"sku":"MB55U","price":109.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MB55U.jpg?v=1780025173"},{"product_id":"mbt6n6","title":"Motobatt Battery Quadflex AGM - MBT6N6","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolyte but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which result in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 6V\u003c\/li\u003e \u003cli\u003eCapacity (10-hour rate): 6Ah\u003c\/li\u003e \u003cli\u003eCapacity (20-hour rate): 4Ah\u003c\/li\u003e \u003cli\u003eWeight: 1.05kg (2.31lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 97 x 56 x 111mm (3.82 x 2.2 x 4.37)\u003c\/li\u003e \u003cli\u003eTerminal Cable Adaptors: MP6NC4, MP6NC5, MP6NC9, MP6NC10, MP6NC12, MP6NC16\u003c\/li\u003e \u003cli\u003eTerminals: 2, Wires\u003c\/li\u003e \u003cli\u003eScrews: NA (Not Applicable)\u003c\/li\u003e \u003cli\u003eAllen Wrench: NA (Not Applicable)\u003c\/li\u003e \u003cli\u003eTerminal Caps: NA (Not Applicable)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA)\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947482632436,"sku":"MBT6N6","price":47.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBT6N6.jpg?v=1780070931"},{"product_id":"mbcterm3","title":"Motobatt C Terminal 3 M5","description":"\u003cp\u003eM5 stainless steel screws for Motobatt batteries. Can fit from top, front or side position. Stacking accessory ring cable harnesses on a single terminal is a thing of the past!\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUp to 8 fitting points per battery.\u003c\/li\u003e \u003cli\u003eUsed for adding additional mounting points for accessory leads.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947482468596,"sku":"MBCTERM3","price":5.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBCTERM3.jpg?v=1780096241"},{"product_id":"mbtz7s","title":"Motobatt Battery Quadflex AGM - MBTZ7S","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 6.5\u003c\/li\u003e \u003cli\u003eC(20) Ah: 6.9\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 100A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 158A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 324A\u003c\/li\u003e \u003cli\u003eWeight: 2.1kg (4.63lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 114 x 70 x 107mm (4.49 x 2.76 x 4.21)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M5x2.5 (MPT1)\u003c\/li\u003e \u003cli\u003eScrews: 4, M5x7 (2x MPS1)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 3x3 (MPAK1)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 2, 11x5.5 (MPC1)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947518513396,"sku":"MBTZ7S","price":152.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBTZ7S.jpg?v=1780083358"},{"product_id":"mbztmpt","title":"Motobatt Tester MB-Mini Pro","description":"\u003cp\u003eThe Motobatt MB-MINI PRO Tester provides an easy and simple way to test 12 Volt lead-acid batteries from 40 to 500 CCA on and off the vehicle. Analyze whether your battery's life, cranking, and charging systems are good or bad within a few milliseconds accurately.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLarge easy-to-read LCD display.\u003c\/li\u003e \u003cli\u003eTest your 12-volt lead-acid batteries easily.\u003c\/li\u003e \u003cli\u003eTests 40 - 500 CCA.\u003c\/li\u003e \u003cli\u003eBattery life analysis.\u003c\/li\u003e \u003cli\u003eTest batteries on and off the vehicle.\u003c\/li\u003e \u003cli\u003eNever discharges or drains the battery.\u003c\/li\u003e \u003cli\u003eTest your vehicle cranking system (cranking time, voltage, and status).\u003c\/li\u003e \u003cli\u003eTest your vehicle charging system (load voltage, unloaded voltage, ripple status, and charging time).\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eNote: Motobatt MB-Mini Pro tester cannot test lithium batteries.\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947528900852,"sku":"MBZTMPT","price":139.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZTMPT.jpg?v=1780062106"},{"product_id":"mb5u","title":"Motobatt Battery Quadflex AGM - MB5U","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 7\u003c\/li\u003e \u003cli\u003eC(20) Ah: 7.4\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 90A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 147A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 350A\u003c\/li\u003e \u003cli\u003eWeight: 2.3kg (5.07lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 120 x 60 x 130mm (4.72 x 2.36 x 5.12)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M5x2.5 (MPT1)\u003c\/li\u003e \u003cli\u003eScrews: 4, M5x7 (2x MPS1)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 3x3 (MPAK1)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 4, 11x5.5 (2x MPC1)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947552166132,"sku":"MB5U","price":89.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MB5U.jpg?v=1780047686"},{"product_id":"mbtz14s","title":"Motobatt Battery Quadflex AGM - MBTZ14S","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 11.5\u003c\/li\u003e \u003cli\u003eC(20) Ah: 12.2\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 170A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 233A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 405A\u003c\/li\u003e \u003cli\u003eWeight: 3.5kg (7.74lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 151 x 87 x 110mm (5.94 x 3.43 x 4.13)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 4, 12x5.5 (2x MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947595256052,"sku":"MBTZ14S","price":169.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBTZ14S.jpg?v=1780182893"},{"product_id":"mbyz16h","title":"Motobatt Battery Quadflex AGM - MBYZ16-H","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 16.5\u003c\/li\u003e \u003cli\u003eC(20) Ah: 17.5\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 240A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 308A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 487A\u003c\/li\u003e \u003cli\u003eWeight: 5.05kg (11.13lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 151 x 87 x 145mm (5.94 x 3.42 x 5.7)\u003c\/li\u003e \u003cli\u003eTerminals: 4, 14x2.5\u003c\/li\u003e \u003cli\u003eScrews: 2, M6x7 (MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: NA\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947595288820,"sku":"MBYZ16H","price":209.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBYZ16H.jpg?v=1780156634"},{"product_id":"mbtx9u","title":"Motobatt Battery Quadflex AGM - MBTX9U","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 10.5\u003c\/li\u003e \u003cli\u003eC(20) Ah: 11.1\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 160A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 195A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 350A\u003c\/li\u003e \u003cli\u003eWeight: 3.4kg (7.5lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 151 x 87 x 110mm (5.94 x 3.43 x 4.13)\u003c\/li\u003e \u003cli\u003eTerminal Height: 110mm (4.13)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 4, 12x5.5 (2x MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: 5mm Bottom (MPBS1)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947613704436,"sku":"MBTX9U","price":142.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBTX9U.jpg?v=1780039762"},{"product_id":"mbzcclc","title":"Motobatt Charger Link Lead with Alligator Clips MB-CC","description":"Motobatt Charger link lead with alligator clips.","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947676324084,"sku":"MBZCCLC","price":12.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCCLC.jpg?v=1780138576"},{"product_id":"mb16u","title":"Motobatt Battery Quadflex AGM - MB16U","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 20\u003c\/li\u003e \u003cli\u003eC(20) Ah: 21.2\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 235A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 301A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 477A\u003c\/li\u003e \u003cli\u003eWeight: 5.9kg (13lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 160 x 90 x 161mm (6.3 x 3.54 x 6.34)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 4, 12x5.5 (2x MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947704570100,"sku":"MB16U","price":211.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MB16U.jpg?v=1780030649"},{"product_id":"mbztbctpr","title":"Motobatt Battery Capacity Tester Printer Paper Roll","description":"\u003cp\u003ePaper roll for Motobatt Battery Capacity Tester Printer (SKU: MBZTBCT).\u003c\/p\u003e \u003cp\u003eDimensions: 57x50 13mm centre 30m\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947745202420,"sku":"MBZTBCTPR","price":0.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZTBCTPR.jpg?v=1780042892"},{"product_id":"mbzcpdfb","title":"Motobatt Charger Fat Boy 12v 2.0A suits Conventional, AGM, GEL \u0026 Lithium","description":"\u003cp\u003eFounded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e9 Step Algorithm\u003c\/li\u003e \u003cli\u003eCanbus Compatible\u003c\/li\u003e \u003cli\u003eAutomatic Charging \u0026amp; Maintaining\u003c\/li\u003e \u003cli\u003eOvercharge Protection\u003c\/li\u003e \u003cli\u003eReverse Polarity Protection (Lead-Acid Only)\u003c\/li\u003e \u003cli\u003eShort Circuit Protection (Lead-Acid Only)\u003c\/li\u003e \u003cli\u003eSpark Proof (Lead-Acid Only)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eApplicatio 12V AGM, Lead-Acid \u0026amp; Lithium\u003c\/li\u003e \u003cli\u003eInput: Auto-switching 120-240VAC 50\/60 Hz\u003c\/li\u003e \u003cli\u003eInput Cable: 6' 18AWG, U.S. SPT-2, EU-H03VV, Aust\/NZ-H03VV\u003c\/li\u003e \u003cli\u003eOutput: 12VDC 2A\u003c\/li\u003e \u003cli\u003eMax Charge Current: 2A\u003c\/li\u003e \u003cli\u003eMax Voltage: 14.9V (Lead-Acid), 14.6V (Lithium)\u003c\/li\u003e \u003cli\u003eBattery Capacity: 4-100Ah (Lead-Acid), 2-20Ah (Lithium)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eMotobatt chargers utilise Motobatt’s unique 9 Stage Charging and Maintenance Process.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Qualification Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eInitially ensures that the battery is in good condition prior to launching charge processing. As a safety measure charge process will not begin if the battery is below 2V.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Battery Rescue Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt Battery Rescue starts if the battery voltage has risen unusually high in the early portion of the re-charge cycle. This is usually caused by plate sulfation. Once the battery rescue phase has succeeded in getting the battery to accept power, normal battery charging will begin.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Soft Start Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSoft Start is used when the charger has detected a battery at a very low initial state of charge. Voltage and current are delivered at specified rates to help the battery to recover prior to entering Pulse charge mode.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Pulse Mode Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMotobatt Pulse mode provides a high-frequency pulse charge to help the newly recovered battery to continue to accept charge as it enters the reconditioning phase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Recondition Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Motobatt reconditioning phase continues to work the battery at a slightly higher voltage and amperage to “re-activate” the battery plates for improved depth of charge and charge acceptance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Bulk Charge Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWith the battery now through Pulse and reconditioning phases and well on its way to full recovery the Motobatt bulk charge phase gives the battery constant current taking the battery up to 80% of its capacity.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Absorption Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIn the Motobatt absorption phase, the battery is given constant voltage while the current is reduced based on action taken from monitoring the batteries current state until the battery is 100% charged.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Check Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe battery will now be checked to be sure that it is holding a charge properly and the charger will make a determination and classify the battery for use, or not.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Maintenance Phase:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe battery can be safely left on the charger indefinitely. The unit will monitor the battery and “turn-on” again as needed to maintain the battery at a full state of readiness.\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947755327732,"sku":"MBZCPDFB","price":199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCPDFB.jpg?v=1780185280"},{"product_id":"mbtx4u","title":"Motobatt Battery Quadflex AGM - MBTX4U","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 4.7\u003c\/li\u003e \u003cli\u003eC(20) Ah: 5\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 70A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 126A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 290A\u003c\/li\u003e \u003cli\u003eWeight: 1.57kg (3.46lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 114 x 70 x 87mm (4.49 x 2.76 x 3.43)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M5x2.5 (MPT1)\u003c\/li\u003e \u003cli\u003eScrews: 4, M5x7 (2x MPS1)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 3x3 (MPAK1)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 2, 11x5.5 (MPC1)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947778003188,"sku":"MBTX4U","price":79.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBTX4U.jpg?v=1780153393"},{"product_id":"mbcterm1","title":"Motobatt C Terminal 1 M8","description":"\u003cp\u003eM8 stainless steel screws for Motobatt batteries. Can fit from top, front or side position. Stacking accessory ring cable harnesses on a single terminal is a thing of the past!\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUp to 8 fitting points per battery.\u003c\/li\u003e \u003cli\u003eUsed for adding additional mounting points for accessory leads.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947836395764,"sku":"MBCTERM1","price":5.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBCTERM1.jpg?v=1780127542"},{"product_id":"mbzcmap","title":"Motobatt Charger Repl Lead Male Lighter Plug BMW MB-MAP","description":"\u003cp\u003eUse to connect and extend the length of any Motobatt 1,2 or 4 bank Charger. Also fits Battery Tender, Schumaker and many others.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAttach direct to any Motobatt charger plug or accessory.\u003c\/li\u003e \u003cli\u003eConnects to BMW Cbus Socket.\u003c\/li\u003e \u003cli\u003eUniversal 2 Pin DIN Plug.\u003c\/li\u003e \u003cli\u003eFlex Fit Plug.\u003c\/li\u003e \u003cli\u003ePlug right in when vehicle is not in use.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947836002548,"sku":"MBZCMAP","price":15.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCMAP.jpg?v=1780131651"},{"product_id":"mbtx12u","title":"Motobatt Battery Quadflex AGM - MBTX12U","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 14\u003c\/li\u003e \u003cli\u003eC(20) Ah: 14.8\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 210A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 275A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 415A\u003c\/li\u003e \u003cli\u003eWeight: 4.4kg (9.7lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 151 x 87 x 130mm (5.94 x 3.43 x 5.12)\u003c\/li\u003e \u003cli\u003eTerminal Height 1: 135mm (5.31)\u003c\/li\u003e \u003cli\u003eTerminal Height 2: 145mm (5.71)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 2, 12x5.5 (MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: 5mm Bottom, 10mm Bottom (MPBS2)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947855007988,"sku":"MBTX12U","price":178.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBTX12U.jpg?v=1780053341"},{"product_id":"mbzccc","title":"Motobatt Charger Baby Boy 6v\/12v 500mA suits AGM \u0026 GEL Batteries","description":"\u003cp\u003eCharger and maintainer of AGM and GEL-sealed batteries. This Motobatt charger performs 3 stages of charging and maintenance algorithm.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e6V and 12V switch selectable.\u003c\/li\u003e \u003cli\u003e3-step fully automatic charger.\u003c\/li\u003e \u003cli\u003eOvercharge protection.\u003c\/li\u003e \u003cli\u003eReverse polarity protection.\u003c\/li\u003e \u003cli\u003eOverload\/short circuit protection.\u003c\/li\u003e \u003cli\u003eSpark-proof.\u003c\/li\u003e \u003cli\u003eMaintains full charge.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eApplication: 6V \/ 12V batteries, suits all AGM, Lead Acid, Calcium, and Gel batteries\u003c\/li\u003e \u003cli\u003eInput: Auto-switching 100-240VAC, 50\/60Hz\u003c\/li\u003e \u003cli\u003eOutput: Select 6V\/12VDC 500mA\u003c\/li\u003e \u003cli\u003eMax Charge Current: 500mA\u003c\/li\u003e \u003cli\u003eMax Voltage: 7.5V (6V battery), 14.7V (12V battery)\u003c\/li\u003e \u003cli\u003eBattery Capacity: Charging – 2 to 20Ah, Maintenance – up to 50Ah\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947876012276,"sku":"MBZCCC","price":59.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCCC.jpg?v=1780158925"},{"product_id":"mbzccfp","title":"Motobatt Charger Repl Lead Female Lighter Socket MB-CCFP","description":"\u003cp\u003eCable charger lead with female cigarette plug. Suits all Motobatt chargers. Also fits battery tender.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCable length: 53cm\u003c\/li\u003e \u003cli\u003eCable size: 18AWB\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947897901300,"sku":"MBZCCFP","price":15.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCCFP.jpg?v=1780080630"},{"product_id":"mbzcht1","title":"Motobatt Charger TECH1 6v\/12v 1.0A suits Lead Acid, AGM, GEL \u0026 Lithium Batteries","description":"\u003cp\u003eA highly versatile charger that will charge smaller and larger batteries and has the correct voltages for AGM, GEL, Calcium, Flooded, LifePo4. It has a handy Ring Terminal charging harness to connect right to your machine.\u003c\/p\u003e \u003cp\u003eSuitable for 6v or 12v and has a 6-step fully automatic setup. Has a lighting system of red stop, yellow working on it, green go.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePlug and Leave.\u003c\/li\u003e \u003cli\u003eCharges 6V \/ 12V Batteries.\u003c\/li\u003e \u003cli\u003eCharges batteries up to 45Ah.\u003c\/li\u003e \u003cli\u003eCharges Lithium batteries up to 70Ah.\u003c\/li\u003e \u003cli\u003eMaintenance Mode.\u003c\/li\u003e \u003cli\u003eCan charge WET, GEL, AGM, and Lithium batteries.\u003c\/li\u003e \u003cli\u003eComes with eyelet connectors.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46947923460340,"sku":"MBZCHT1","price":99.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCHT1.jpg?v=1780144102"},{"product_id":"mb51814","title":"Motobatt Battery Quadflex AGM - MB51814","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 20\u003c\/li\u003e \u003cli\u003eC(20) Ah: 21.2\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 235A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 302A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 480A\u003c\/li\u003e \u003cli\u003eWeight: 6.75kg (14.88lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 183 x 80 x 170mm (7.2 x 3.15 x 6.69)\u003c\/li\u003e \u003cli\u003eTerminals: 2, M6x2.5 (MPT2)\u003c\/li\u003e \u003cli\u003eScrews: 4, M6x7 (2x MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: 4, 12x5.5 (2x MPC2)\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46948013244660,"sku":"MB51814","price":225.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MB51814.jpg?v=1780055022"},{"product_id":"mbzccrt","title":"Motobatt Lead 600mm with Fuse, SAE Plug, Fixed 6mm Eyelets","description":"\u003cp\u003eQuality 18AWG wire battery Ring Terminal Harness used to fit many battery chargers including MotoBatt, Battery Tender, Battery Minder, Schumacher, Schauer, Yuasa, Pulsetech, Ozcharge.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e53cm (21\") 18AWG Cables with 7.5A Fuse.\u003c\/li\u003e \u003cli\u003eSuits 6mm ring terminals.\u003c\/li\u003e \u003cli\u003eAttach direct to any powersport battery.\u003c\/li\u003e \u003cli\u003eSuitable for all Motobatt Chargers.\u003c\/li\u003e \u003cli\u003eSuits also many other branded chargers.\u003c\/li\u003e \u003cli\u003ePlug right in when vehicle is not in use.\u003c\/li\u003e \u003cli\u003e2 DIN Plug end with dustcap.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46948046635252,"sku":"MBZCCRT","price":15.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCCRT.jpg?v=1780164532"},{"product_id":"mbzccrt8","title":"Motobatt Lead 600mm with Fuse, SAE Plug, Fixed 8mm Eyelets","description":"Motobatt replacement lead\u003cbr\u003e Length: 600mm\u003cbr\u003e Fuse? Yes\u003cbr\u003e Plug1: SAE\u003cbr\u003e Plug2: 8mm Eyelets","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46948093821172,"sku":"MBZCCRT8","price":15.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZCCRT8.jpg?v=1780158851"},{"product_id":"mbztavm","title":"Motobatt Volt Meter 6V\/12V","description":"\u003cp\u003eFounded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.\u003c\/p\u003e\r\n\u003cp\u003eThe Motobatt Volt Meter provides quick and easy voltage reading of your battery. Compatible with most 6 \u0026amp; 12V batteries with a reading from 4.99 to 19.99 Volts.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eVoltage: 6V\/12V\u003c\/li\u003e\r\n\u003cli\u003eRange: 4.99 - 19.99 Volts\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46948099326196,"sku":"MBZTAVM","price":24.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZTAVM.jpg?v=1780131676"},{"product_id":"mbztvm","title":"Motobatt Tester 12V Voltmeter Pocket","description":"\u003cp\u003eFounded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eGreat mobile voltage testing\u003c\/li\u003e \u003cli\u003eSlim compact design\u003c\/li\u003e \u003cli\u003eCompatible with 12V batteries\u003c\/li\u003e \u003cli\u003eProvides quick and easy voltage readings\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eApplication: 12V Batteries\u003c\/li\u003e \u003cli\u003eTest Range: \u003cul\u003e \u003cli\u003eBattery Voltage:\u003c\/li\u003e \u003cli\u003e25% - 9.8 to 12V\u003c\/li\u003e \u003cli\u003e50% - 12V to 12.4V\u003c\/li\u003e \u003cli\u003e75% - 12.4V to 12.6V\u003c\/li\u003e \u003cli\u003e100% - 12.6V to 13.8V\u003c\/li\u003e \u003cli\u003eCharging Voltage:\u003c\/li\u003e \u003cli\u003eGood - 13.8V to 14.7V\u003c\/li\u003e \u003cli\u003eBad - 14.7V and up\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46948110041332,"sku":"MBZTVM","price":39.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBZTVM.jpg?v=1780108010"},{"product_id":"mblx20uhdhp","title":"Motobatt Pro Lithium Battery MLX20UHD-HP *4","description":"\u003cp\u003eMotobatt Pro Lithium HP Series battery offers complete overcharging, over-discharging, temperature protection and cell balancing capability, to provide maximum performance, protection and safety to the battery.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDynamic Cell Balancer: Optimizes each cell voltage to maximum.\u003c\/li\u003e \u003cli\u003eOver-Charge Protection: Prevents the machine or charger from overcharging the battery; cut off at 15.4V.\u003c\/li\u003e \u003cli\u003eUnder Discharge Protection: Prevents the battery from being overdischarged to premature failure; Cut off at 8V\u003c\/li\u003e \u003cli\u003eThermal Protection.: Temperature sensor shuts down before dangerous temperatures can occur; Cut off at 75°C\u003c\/li\u003e \u003cli\u003eReactivation: Can be reactivated from shutdown with Motobatt PDCFB Charger or any charger that starts from 0 volts.\u003c\/li\u003e \u003cli\u003ePerformance: Designed for performance rides. \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003eBattery Type: MLX20UHD-HP Pro Lithium Lifepo4\u003c\/li\u003e \u003cli\u003eVoltage: 13.2V\u003c\/li\u003e \u003cli\u003eCapacity: 12A\u003c\/li\u003e \u003cli\u003eCCA: 720\u003c\/li\u003e \u003cli\u003eWeight: 3.06Lbs (1.39KG)\u003c\/li\u003e \u003cli\u003eDimensions (in \/ mm): \u003cul\u003e \u003cli\u003eL: 6.89 (175)\u003c\/li\u003e \u003cli\u003eW: 3.43 (87)\u003c\/li\u003e \u003cli\u003eH: 6.10 (155)\u003c\/li\u003e \u003cli\u003eTW: 3.94 (100)\u003c\/li\u003e \u003cli\u003eTH: 6.89 (175)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eAssembly Figure Terminal Locations: 4\u003c\/li\u003e \u003cli\u003eTerminals: 4, Fixed HD Compatible\u003c\/li\u003e \u003cli\u003eScrews: 2, M6X10 (Part#2xMPS3)\u003c\/li\u003e \u003cli\u003eSpacers: \u003cul\u003e \u003cli\u003e1x 175x87x20 mm Height Spacer Pt (EVA7)\u003c\/li\u003e \u003cli\u003e1x 170x115x15 mm Width Spacer Pt (EVA8)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46948203856116,"sku":"MBLX20UHDHP","price":489.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBLX20UHDHP.jpg?v=1780168528"},{"product_id":"mbu135","title":"Motobatt Lug Type Terminal MBU1-35 - Positive L\/H","description":"\u003cp\u003eSpecifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.\u003c\/p\u003e \u003cp\u003eMotobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.\u003c\/p\u003e \u003cp\u003eEach plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.\u003c\/p\u003e \u003cp\u003eAGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.\u003c\/p\u003e \u003cp\u003eYour Motobatt is a Factory Activated battery, it comes to you pre- conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eVoltage: 12V\u003c\/li\u003e \u003cli\u003eC(10) Ah: 35\u003c\/li\u003e \u003cli\u003eC(20) Ah: 37.1\u003c\/li\u003e \u003cli\u003eCCA (Cold Cranking Amps): 420A\u003c\/li\u003e \u003cli\u003eMCA (Marine Cranking Amps): 523A\u003c\/li\u003e \u003cli\u003ePHCA (Pulse Hot Cranking Amps): 710A\u003c\/li\u003e \u003cli\u003eWeight: 10.5kg (23.16lbs)\u003c\/li\u003e \u003cli\u003eDimensions (LxWxH): 195 x 130 x 179mm (7.67 x 5.16 x 7.13)\u003c\/li\u003e \u003cli\u003eTerminals: 2, 16x16 (Threaded Flag)\u003c\/li\u003e \u003cli\u003eScrews: 2, M6x7 (MPS2)\u003c\/li\u003e \u003cli\u003eAllen Wrench: 1, 4x4 (MPAK2)\u003c\/li\u003e \u003cli\u003eTerminal Caps: NA\u003c\/li\u003e \u003cli\u003eSpacer: None\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented QuadFlex multi-fit terminals.\u003c\/li\u003e \u003cli\u003eAbsorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.\u003c\/li\u003e \u003cli\u003eFully sealed – Can be mounted and transported in any position.\u003c\/li\u003e \u003cli\u003eNo initial charging – Install and go, charged right out of the box.\u003c\/li\u003e \u003cli\u003eMaintenance Free – No messy acid to worry about.\u003c\/li\u003e \u003cli\u003e20% more cold cranking amps (CCA).\u003c\/li\u003e \u003cli\u003eEasy accessory connection with multiple terminals.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eMotobatt batteries are available via courier delivery as they contain no liquid acid!\u003c\/em\u003e\u003c\/p\u003e","brand":"Motobatt","offers":[{"title":"Default Title","offer_id":46948232528116,"sku":"MBU135","price":199.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/7684\/6580\/files\/MBU135.jpg?v=1780036295"}],"url":"https:\/\/motopro.nz\/collections\/motobatt-batteries.oembed","provider":"MOTO PRO","version":"1.0","type":"link"}